A mixture that prolongs the barrel life was obtained in Nevşehir

An essential examine was carried out in order to increase the barrel life of the weapons.

Success was achieved in the pre-test of the particular mixture developed in this context in the prototypes at the Cappadocia Technopark on the Nevşehir Hacı Bektaş Veli College (NEVÜ) campus.

Bülent Kurt and Cemal Çarboğa, educational members of the Division of Metallurgy and Supplies Engineering at the College of Engineering and Structure, who’ve been engaged on gun barrels with a mixture of titanium, boron and carbon compounds at Technopark for 2 years, obtained a particular materials.

A mixture that prolongs the barrel life was obtained in Nevşehir VIDEO

OVEN AT 1050 DEGREES

Scientists improve the barrel life of the weapons by baking the personnel weapons, which they cowl with the new materials they produce, at a temperature of 1050 levels.

Kurt said that the take a look at phases gave profitable outcomes in the examine they carried out with KOSGEB’s innovation and R&D assist.

Stating that the success that emerged because of lengthy efforts excited the followers of the topic in addition to themselves, Kurt said that they produced numerous gun barrels and prototypes of gun mechanisms that have been topic to put on.

10X HARDNESS REACHED

Kurt emphasised that, contemplating the knowledge obtained in the examine, which is able to contribute considerably to the protection business, steps will probably be taken to use this mixture to tank and howitzer barrels in the future.

Kurt said that the coating system can be utilized with out inflicting extra burden to the protection business since it’s produced with home services. “The coating can usually be achieved on the outer surfaces, however the coating on the within the barrel may be very troublesome. With this work, we now have ensured the manufacturing of coating powder, the set up of coating techniques and the coating. It will increase the shot life and vary of all weapons with a barrel. We’ve got reached a hardness 10 occasions greater than the hardness of barrel metal. This It has been an enormous success.” mentioned.

A mixture that extends the barrel life has been obtained PHOTO GALLERY

“WE APPROACHED THE FRICTION COEFFICIENT TO ZERO”

Arguing that comparable research have been carried out overseas, however the profitable end result they achieved couldn’t be achieved, Kurt continued his phrases as follows:

“In our analysis, we now have discovered that nano-level coatings are made overseas. We’ve got seen that the life of nano-level coatings doesn’t go any additional than lubricating the within the barrel. We make 5 and eight micron thick titanium boron carbide interior coatings on the barrels. This utility will deliver excessive options to the weapons, particularly the barrels of our nationwide weapons and put on. It may be simply utilized to uncovered mechanism components.

In the examine, we carried out the coating and accomplished the assessments. The coating layer thickness of 8-10 micro stage is certainly not out of the requirements. The coating we make is tightly sure to the principal materials, so it is not going to peel off or peel off. We set the coefficient of friction near zero. This implies that the shot life will improve when the barrel doesn’t warmth up.”

KOSGEB Nevşehir Provincial Director Ali Usta said that they’re happy with the success of the undertaking they supported and added that they consider they may see the days when the course of is accomplished and contributes to the nation’s financial system.